NEW: Bigger cells, better performance
A slight increase of the size of our monocrystalline cells, boosts the performance of the newest modules.
DOUBLE GLASS MODULES
Most solar modules have glass plates on the front side, protecting the solar cells from weather influences and dirt. By placing a second glass plate at the back side, instead of the traditional foil, the life duration of the panel increases significantly.
There are double glass panels with mono- or polycrystalline cells. The EVA can be white, black or transparent and the anodized aluminium frames are black or silver colored. Frameless is also possible.
Double glass modules with black anodized aluminum frames:
DMG340M6A-120HBW
120 half cut cells, white backsheet, 330 | 335 | 340 Wp
DMG330M6A-120HBT
120 half cut cells, transparent, 320 | 325 | 330 Wp
DMG325M6A-60BT
60 cells, transparent, 310 | 320 | 325 Wp
DMG310M6-60BT
60 cells, transparent, 300 | 305 | 310 Wp
DMG325M6A-60BB
60 cells, full black, 315 | 320 | 325 Wp
DMG310M6-60BB
60 cells, full black, 300 | 305 | 310 Wp
DMG300M6-60BW
60 cells, white EVA, 290 | 295 | 300 Wp
BLACK SERIES
The stylish and sober appearance of the solar modules in our ‘Black Series’ make them aesthetically very suitable for visible roofs of residential projects or professional environments.
‘Black series’ modules have M2 or PERC monocrystalline cells, a black backsheet or screenprinted glass, and a anodized black aluminum frame.
Modules with black backsheet:
DM385-M159-72BK
72 cells: 375 | 380 | 385 Wp
DM360-M159-66BK
66 cells; 350 | 355 | 360 Wp
DM330-M159-66UB
66 cells; 320 | 325 | 330 Wp
DM325-M159-60BK
60 cells, 315 | 320 | 325 Wp
DM310-M159-60UB
60 cells, 300 | 305 | 310 Wp
Double glass module:
DMG300M6-60BB
60 cells, 290 | 295 | 300 Wp
Half cut cell module:
DMH320M6-120BB
120 half cut cells, 310 | 315 | 320 Wp
DMH310M6-120BB
120 half cut cells, 300 | 305 | 310 Wp
HALF CELL MODULES
For these series of modules the solar cells are cut in two and divided in two parallel groups. With this the internal resistance is decreased and the receptive capacity is increased.
For the newest series the new 158,75 mm cells are used.
DMH340M6-120SW
120 monocrystalline half cells, 330 | 335 | 340 Wp
DMH340M6-120BW
120 monocrystalline half cells, 330 | 335 | 340 Wp
DMH400M6-144SW
144 monocrystalline half cells, 390 | 395 | 400 Wp
DMH320M6-120SW
120 half cells; anodized aluminum frame; white backsheet;
310 | 315 | 320 Wp
DMH320M6-120BB
120 half cells; anodized black aluminum frame; black backsheet;
310 | 315 | 320 Wp
DMH320M6-120BW
120 half cells; anodized black aluminum frame; white backsheet;
310 | 315 | 320 Wp
MONOCRYSTALLINE MODULES
The combination of monocrystalline PERC cells with a white backsheet results in the highest efficiency, but DMEGC Solar also produces them with the more economical M2 cells.
The modules in this section all come with 35 or 40 mm anodized aluminium frames.
Monocrystalline modules with double glass can be found in the section above.
Modules with black backsheets can be found in the ‘Black series’ section above.
DM335-M158-60
60 cells, 325 | 330 | 335 Wp
DM400-M158-72
72 cells, 390 | 395 | 400 Wp
DM315-M156-60
60 cells, 305 | 310 | 315 Wp
DM290-M156-60
60 cells, 280 | 285 | 290 Wp
DM375-M156-72
72 cells, 365 | 370 | 375 Wp
DM345-M156-72
72 cells, 335 | 340 | 345 Wp
Modules with black anodized aluminum frames:
DM315-M156-60B
60 cells, 305 | 310 | 315 Wp
DM290-M156-60B
60 cells, 280 | 285 | 290 Wp
BIFACIAL MODULES
On earth, sun rays mostly come from above, under an angle. Unless you are standing on the equator, at noon. The rays are often reflected by clouds, water surfaces or buildings. These indirect rays can still contain energy. They can reach solar panels from the sides, or from the back.
To generate electricity from rays from different angles, DMEG Solar developed Bifacial cells. These cells are used in transparent double glass modules.
The efficiency improvement depends strongly on the positioning of the module and the color and structure of the reflective surfaces under or near it. If these surfaces are painted white or covered with reflective foil, the output will be further optimized.
A Bi-facial module can be used in:
• Flat roof installations, on a light colored or white roof, or covered with reflective foil
• Floating installations. The water will reflect much of the sun rays to the back.
• Vertical set-ups, for instance in sound barriers. or facades.
DMG315B6-60ST
Double glass (2 x 2.5 mm), 60 monochrystalline cells, anodized aluminum frame
305 | 310 | 315 Wp
DMG315B6-60XT
Double glass (2 x 2.5 mm), 60 monochrystalline cells, frameless
305 | 310 | 315 Wp
DMG315M6-60BT
Double glass (2 x 2.5 mm), 60 monochrystalline cells, anodized black frame
305 | 310 | 315 Wp
POLYCRYSTALLINE MODULES
While also used in residential installations polycrystalline modules nowadays are mostly used in cost-sensitive large scale projects.
These large scale installations are often realized on flat roofs and in ground installations like solar fields.
Polycrystalline modules with white backsheets and anodized aluminum frames:
DM280-P156-60
60 cells, 270 | 275 | 280 Wp
DM280-P156-60B
60 cells, 270 | 275 | 280 Wp
DM330-P156-72
72 cells, 320 | 325 | 330 Wp
See the Double Glass section for polycrystalline modules with double glass
OPTIMIZERS AND MICRO INVERTERS
Most PV systems consist of a series of solar modules (a string) and one or more inverters, to convert the output of the modules to 220/230 Volts AC.
A drawback of this system is that the least performing module (possibly due to orientation, leaves or shadow) is decreasing the output of the other modules in the string. This problem can be avoided with Power Optimizers or Micro Inverters. These can be preinstalled by DMEGC solar.
Solar Edge power optimizers
Constantly track the the performance of each module and communicate performance data to the SolarEdge monitoring portal, making it possible to optimize the whole PV-system. Recommended for installations with multiple orientations, tilts and module types in the same string.
DM320-M158-60EUS 40mm SE
60 cells, Ultra Black, 305 | 310 | 315 | 320 Wp
DM310-M156-60BK 40mm SE
60 cells, Full Black, 295 | 300 | 305 | 310 Wp
DM305-M156-60 40mm SE
60 cells, 290 | 295 | 300 | 305 Wp
Enphase Micro Inverters
In stead of string inverters, Enphase Micro Inverters (EMI) are converting the power per module, so each module can perform at its best. EMI’s also make it possible to combine different types of modules in one system and make installation easier.
DM320-M158-60BK 40mm EMI
60 cells, black backsheet and frame
305 | 310 | 315 | 320 Wp
